Т. 51. Бр. 4. Метални, дървени и комбинирани конструкции.
Анотация
"Tensile membrane structures have been widely used across Europe for more than half a century. While there is a standard concerning tensile membrane structures in the USA, there is not yet a design code for these structures in the European Union. European Design Guide for Tensile Surface Structures and Prospect for European Guidance for the Structural Design of Tensile Membrane Structures have already been published. Work on Eurocode for the Structural Design of Tensile Membrane Structures is underway. Once it comes into force, this standard will be connected to other Eurocodes, especially Eurocode 0 and Eurocode 1. One of the implications will most likely be the introduction of point loads to structural analysis of tensile membrane structures. However, there have been very few researches about the effects of point loads to membrane structures. This paper presents a part of the research done on the
effects of point load actions to deflections of tensile membrane structures".
Markovic, B., Milosevic, V. Point Loads and Eurocode for the Structural Design of Tensile Membrane Structures,
УАСГ, 2018, с. 99 - 107.
Markovic, B., Milosevic, V. .
Point Loads and Eurocode for the Structural Design of Tensile Membrane Structures.
София: УАСГ, 2018, с. 99 - 107.
Markovic, B., Milosevic, V. (2018)
Point Loads and Eurocode for the Structural Design of Tensile Membrane Structures,
София: УАСГ, с. 99 - 107
Markovic, B., & Milosevic, V.
(2018).
Point Loads and Eurocode for the Structural Design of Tensile Membrane Structures. Годишник на Университета по архитектура, строителство и геодезия - УАСГ. София: УАСГ 51 (бр. 4.), с. 99 - 107.
